As a commonly used wall decoration material in modern households, pvc interior wall panels have the advantages of light weight, rich color patterns, heat preservation, heat insulation, moisture resistance, and convenient construction, so they are favored by consumers. Before using this kind of panel decoration, please be sure to understand how to install pvc wall panels.
How to identify the quality of pvc wallboard
1. Determine the materials used
The quality of the product has a lot to do with the material. The pvc wallboard produced with this new material has clear texture, good toughness, and is not easy to age. In order to save costs, some manufacturers have reduced the use of recycled materials. The product produced has some taste, and the product and color are not as good as the product and color produced by the new material.

2. Determine the product density
The pvc wallboard produced with this new material has high density, good comprehensive strength, and is not easy to deform; the pvc wallboard produced by inferior materials has low density, low hand feeling, low strength and appearance, without the need to produce new materials.
3. Look at the film used on the surface
A good film has a thicker thickness, a realistic bottom, a three-dimensional effect, and no peculiar smell; the relatively thin film, which is recycled with waste plastic, is thinner and has a smell.
The installation method of pvc wallboard
1. To maintain the level when extending the line, you can use the vertical vector of the ruler to design the elevation of the ceiling according to the level of the floor elevation, play the keel position line on the top plate, and bounce back to the horizontal line. The ceiling on the wall.
2. When installing the keel boom, the top of the ceiling and the position line of the main keel should be leveled, and the height of the lower part of the boom should be determined. According to the position of the main keel and the suspension distance, the boltless end of the boom is fixed under the floor with expansion bolts. .
3. When installing the main keel, you must first install the boom nut, mark the main keel in advance, assemble the main keel, and install the suspension into the corresponding boom bolt according to the position of the line. snails.
4. When installing pvc wall panels, please start from the top. When cutting paper, the material should be flat and free of burrs. The higher the cutting speed, the fewer burrs. The size must be between 2mm, otherwise the seams will be very neat.